Payment & Shipping Terms:
|Name:||Coil Tattoo Machine||Material:||Alloy|
Alloy Casting Handmade Coil Tattoo Machine With 10 Wraps Coils For Shader
1. Copy the transferred pattern, According to the size of the pattern, the transfer pattern is cut into a circle, Then, cut it radially around the pattern and then transfer it. The advantage of this, that is the transfer pattern can be comfortably attached to the transfer site without wrinkling. Note: Do not cut short pattern lines when cutting.
2. Use baby lotion instead of petrolatum when creating the lines, and thin coating 1 layer is ok.
3. How to prevent the needle nozzle from jetting ink when do the lining and shading.
A. Fix the rubber ring, The tin interfaces outward when the round needle is inserted.
B. Then gently bend inwards a small arc, make it close to the needle is ok.
C. When the Flat needle inserted, the tin interfaces inwards, then gently bend inwards a small arc, make it close to the needle too.
D. Choose the suitable cartridge, do not be too big than needles.
4. Reuse of tattoo needles, Although it is using disposable needles now, But due to the complexity of the graphics and the difficulty of engraving, Many patterns cannot be completed at one time, Some needles only used a time, throw it will be a waste, if keep it, will be unhygienic, so how to do it?
5.You can buy the tubes and tubes racks from Experimental equipment vendors, If the needle used by the same person was not damaged, After cleaning and autoclaving, Put absorbent cotton at the bottom of tube, Then inject the right amount of alcohol then put the needle into the tube, Then remark each person’s name.
6. When drawing the patterns on the female’s Chest and waist, Waist drawing needs to be performed under natural standing conditions, In particular, some symmetry charts, due to the extension of the waist, the pattern of stance and sitting posture changes greatly.
How to place order