Payment & Shipping Terms:
|Name:||Coil Tattoo Machine||Material:||Cast Iron|
|Weight:||220g||Gun Type:||Liner And Shader|
|Coil:||8 Wraps||Package:||Color Box|
Handmade Pure Copper Coils 8 Wraps Coil Tattoo Machine For Liner and Shader
Name: Stamping coil tattoo machine
Material: carbon steel
Rotate speed: 20000-25000 per minute
Start voltage is 3-4v
Normal working voltage is 7-9v
1. Elastic rod does not touch the contact of the ramp, Loosen the elastic bar and screw it so that the elastic bar rotates down and touches the contact, Rotate it to a suitable position and tighten the screws to lock the elastic bar.
2. The power switch is not turned on, so turned on the power switch, and the indicator light will be red.
3. Adjust the button (VOLTAGE) at zero position, the V table pointer is also at zero at the same time. Adjust the button rotates clockwise slowly. V table pointer is also rotating at the same time, V table pointer should stop at 6-10V.
4. If the elastic bar contact with the front spring is too tight, it will not start and it may cause a short circuit in the power supply. If the power switch is turned on, the indicator light is green and there is no voltage, then the elastic rod screw need to be released, Loosen the elastic rod upward and away from the elastic tab to re-adjust the elastic rod to touch the contact, restart the power supply, and adjust the elastic rod to a suitable position.
5. Shutdown at work, probably during the working, Ripped off a wire Accidentally, now you need to check the foot switch and if the power cord plug in the right place.
6. After the work is finished, when the tattoo machine is cleaned and disinfected, the line on the machine is broken (dislocation), check whether the thread on the tattoo machine is dislocated (broken off), now you need to find an electrician, and weld the line.
|Name||Coil tattoo machine||Model||MCY004|
|Material||Cast rion||Type||Liner and shader|
How to place order